Seed treaters
The Norogard x Westrup machines are made for precise addition of treating liquids and/or powder to the seed before sowing, with more than 60 years’ experience. The Norogard x Westrup seed treaters can distribute an accurate amount of treating fluids to every seed with very little or no spillages. The machines are easy to install and calibrate, are low maintenance, safe for the operators to use, and easy to service.
A seed treater is used after the seed has been cleaned and sorted to protect the seed after sowing. The process can also help prolong the lifespan of the seed after sowing and optimize the seed in the sowing process.
BATCH SEED COATERS
R1250
The R1250 handles batch capacities from 10-280 liters and is engineered for advanced seed treatments, including coating and pelleting of seeds with a minimum diameter of 2 mm.
R1000
With a batch capacity of 10 to 200 liters, the R1000 is designed for complex seed treatments and equipped to handle coating and pelleting of seeds with a minimum diameter of 2 mm.
R800
The R800 is designed for advanced seed treatments, offering a batch capacity of 10 to 80 liters and supporting coating and pelleting of seeds with diameters as small as 2 mm.
R534
Designed for precision treatments, the R534 handles batch sizes from 1 to 20 liters and is ideal for seed dressing, incrustation, coating, and pelleting.
CONTINUOUS SEED TREATERS
R35-R45
Capacity: 12.6-40.5 tons/hour
The NoroGard R45 Continuous Seed Treater handles 16.2–40.5 tons/hour, delivering high-quality treatment for volume seeds like cereals, corn, peas, soybeans, OSR, cotton, and sunflowers. The R35 offers similar precision with a capacity of 12.6–31.5 tons/hour.
R15-R20-R24
Capacity: 5.4-22 tons/hour
The NoroGard R15, R20, and R24 Continuous Seed Treaters are designed for high-quality, sophisticated treatment of volume seeds such as cereals, corn, peas, soybeans, OSR, cotton, and sunflowers. The R15 handles 5.4–13.5 tons/hour, the R20 manages 7.2–18 tons/hour, and the R24 delivers a capacity of 9–22 tons/hour—offering flexible solutions for seed plants with varying throughput needs.
R8
Capacity: 2.9-7.2 tons/hour
NoroGard R8 performs at a capacity of 2.9 – 7.2 tons/hour and is a combination of state of the art engineering, design and innovation. The NoroGard R8 Continuous Seed Treater provides a capacity to treat from a batch of 2.9-7.2 tons/hour which makes it suitable not only in production, but also for laboratory use. This makes it easily adapted for small and medium sized treatment plants and seed breading stations
K7
Capacity: up to 6.3 tons/hour
The K7 Continuous Seed Treater is suitable for small and mid sized plants with its variable capacity of up to 6.3 tons of seed per hour and dosing rates from 100 ml to 2.4 litres per 100 kg seed
R1
Capacity: up to 2.3 tons/hour
With a capacity of up to 2.3 ton/hour, the R1 is designed for on farm use or for small seed production companies. It is designed for treatment of wheat, barley, rye, oat, corn, peas, soybeans, sunflower seeds etc. with liquids
LABORATORY SEED TREATERS
R300
Capacity: 0.3 - 3.0 l./batch
The R300 has a capacity of 0,3 – 3,0 liters per batch and is perfect for defining production parameters prior to production for both coating and pelleting. Available with dosing system
R150
Capacity: up to 450 ml./batch
R150 is a laboratory seed treater designed for treating a wide range of seeds with a range of products, formulated as liquids, powders, flowables, slurries, gels, etc. It treats in batches up to 450 ml
-
A batch seed treater is used for pelleting, coating, incrustation, and dressing coaters. Either with a powder or liquid treatment solution. This is done for different reasons, such as to protect the seed from diseases, keep any added fertilizer or pesticide on the seed, to make it visually easy to see when spreading and prolonging the lifespan of the seed.
-
A batch treater is a very accurate machine as it treats each kg of seeds with an exact amount of liquid or combination of liquid and powder.
A premeasured amount of seed is added to the machine, e.g. 100 kg, after which the amount of liquid is added (ml) and/or the powder (gram).
The batch is mixed in a constant flow for a few minutes until the product is completely even.
When coating different types of powder can be added one by one to obtain the desired coating.
-
Our continuous seed treaters are designed for the treatment of diverse products such as cereals. The construction ensures an even flow of both seed and treating liquid while assuring a high level of treatment quality.
This is done for different reasons, such as to protect the seed from diseases, keep any added fertilizer or pesticide on the seed, to make it visually easy to see when spreading and prolonging the lifespan of the seed.
-
The product and the liquid are added at the same time in the treater, so the surface of the seeds will be evenly covered with liquid. This can be done in pre-programed recipes for an easy treating process.
-
A seed treater is used to give the seeds a high germination when it will be sown out.
A seed treater can also protect the seed from diseases, keep any added fertilizer or pesticide on the seed, to make it visually easy to see when spreading and prolonging the lifespan of the seed.
MORE PRODUCTS:
FINE CLEANERS · GRADERS · GRAVITY SEPARATORS · INDENTED CYLINDERS · MODULAR CLEANERS · NAVIGATOR 4.0 · OPTICAL SORTERS ·
PRE-CLEANERS · SEED TREATERS · SMALL-SCALE MACHINES · VARIOUS EQUIPMENT
